16 STEEL WHEELS//16 Steel Wheels : Boat Steering Wheel Cufflinks.

76mm longboard wheels : Carbon car wheels

76mm Longboard Wheels

76mm longboard wheels

  • A type of long surfboard

  • Longboarding is the act of riding on a longboard.

  • This article contains gratuitous slang.

  • A sailboard hull that s more than 11 feet (336 cm) long.

  • A circular object that revolves on an axle and is fixed below a vehicle or other object to enable it to move easily over the ground

  • A circular object that revolves on an axle and forms part of a machine

  • (wheel) a simple machine consisting of a circular frame with spokes (or a solid disc) that can rotate on a shaft or axle (as in vehicles or other machines)

  • Used in reference to the cycle of a specified condition or set of events

  • (wheel) change directions as if revolving on a pivot; "They wheeled their horses around and left"

  • steering wheel: a handwheel that is used for steering

76mm longboard wheels - BIGFOOT Longboard

BIGFOOT Longboard Wheels 76mm CRUISERS Green + Abec 9

BIGFOOT Longboard Wheels 76mm CRUISERS Green + Abec 9

The Bigfoot Mountain cruisers offer a newly modified super high rebound formula. This new formula was chosen based on rider feedback, the 80a hardness and 51mm wide footprint make the mountain cruisers perfect for the rider looking to board fast and have a smooth ride while doing it. Once broken in these wheels are great for sliding too.

This auction contains a set(4) of brand new Longboard wheels & abec 9 bearings for your set-up. These wheels come new and are still in shrink wrap. The mountain cruiser model from bigfoot offers the rider maximum stability and support. This wheel is specially formulated with a rear-set bearing seat, molded with 80a durometer urethane. These wheels are Big, Soft and Smooth. These wheels Measure 76mm in diameter, and have a 51mm contact patch. The wide footprint is really what sets these wheels apart, they offer the rider so much more!

Looking for something smaller? Check out the 70mm Forest Cruisers in our Ebay Store!!

83% (15)

A summer project (47/365)

A summer project (47/365)

These little guys are a set of my longboard wheels. (Well technically there are 2 different sets there but the one in the back is for comparison purposes only) I really hate these wheels but I bought them a few years ago because they were cheap and I could slide and destroy them without feeling bad. Or at least it was the plan to destory them... Today was the first Shitpins session of the year (a notorious hill for killing wheels) and it's taken me 2 years to wear them down from 76mm in diameter to todays measurement of under just 70mm. (The wheel in the back is a brand new one, I know I hate them so why do I have 2 sets? I got the second set for $5 and couldn't say no) My mission this summer is to finally wear these wheels down to the core so I can justify starting to slide the rest of the over flowing collection of wheels I have. I really don't know if it's possible for me to do it but I'm going to give it my best shot.

2009/05/10 - quiver

2009/05/10 - quiver

left: Zoo York 40" deck with kicktail

middle: Loaded Vanguard 42" / Flex 2, Randal R-II 180mm trucks in Charity Pink colour, Abec 11 Gumballs wheels 76mm/75a

right: Sector 9 pintail 47", Gullwing Mission 1 150mm trucks, no wheels yet...

76mm longboard wheels

76mm longboard wheels

Moose Drop Through Longboard Skateboard

This is custom built and designed for downhill speed and a wide turning radius. The Core 7.0 Longboard Trucks are made of a strong, aluminum alloy. The Hanger measures 9.63-Inch from tip to tip, 95A USA Made Premium Bushings. These trucks are designed to last, wear smooth, and turn like no other. The wheels are 80 millimeter Premium Urethane. These wheels have a slightly offset bearing seat for maximum stability and at 53 millimeter wide. This shape is designed specifically for the rider looking for more support on hard turns. Abec 7 Bearings are fast and efficient. Manufactured with Chrome steel balls, a self lubricating derlin crown, and feature rubber, servicable bearing sheilds.The Black Diamond Grip Tape, made from thick-mil, super sticky paper and fine grit. The Risers are 1/4-Inch. Just enough to to prevent wheel bites, and to take some of the stress off the deck.

Related topics:

power wheels barbie car

steering wheel airbag cover

turbine water wheel

beach wagon wheels

road racing wheels

longboard wheels nz

sometimes i feel like i am drunk behind the wheel

5th wheel toy hauler reviews

Category: None | trackback(0) | comment(0) |






| TOP |